GREEN BELL Green bell stainless steel magnifying glass with Fukazume prevent nail clippers QQ-07
GREEN BELL Green bell stainless steel magnifying glass with Fukazume prevent nail clippers QQ-07
Brand: GREEN BELL
Weight: 75g
JAN: 4972525501385
※Quantity limit per purchase:5 pieces
Dispatch Est.: 3days
ข้อมูลผลิตภัณฑ์
· Fukazume และไม่ได้ออกแบบความปลอดภัย.
– กับยามเพื่อป้องกันการตัดมากเกินไปของเล็บ
.
– เล็บของการลดการกระเจิง! กับกรณีจับ.
– ปรับ Tsumeyasuri ที่ด้านหลังของคันโยก
.
-. เส้นตรงและใบมีดแนวตั้งที่เหมาะสำหรับการสปริงที่
วิธีใช้
◆หากคุณจะออกจากกรณีจับ
(1) เพื่อย้ายเลนส์ไปยังตำแหน่งที่ไม่ได้รับในทางที่.
(2) รัฐที่เกิดจากคันโยก.
(3) เปิดร่างกาย.
ได้มือข้างหนึ่งในคันโยกให้แน่นโปรดลบด้านก้นของใบมีด (ส่วนโลหะ) จากกรณีและกดเบา ๆ ในทิศทางที่ลดลงด้วยมือตรงข้าม.
(4) เพื่อหลีกเลี่ยงการประมาณการในส่วนของใบมีดก็สามารถลบออกได้อย่างราบรื่นและดึงร่างกายทแยงมุม.
◆หากคุณต้องการจับ
(1) ในรัฐที่ทำให้เกิดการคันโยกหลังจากใส่ด้านซ้ายและด้านขวาของการฉายภาพที่แนบมากับกรณีจับช่องว่างระหว่างใบมีดและใบมีดแน็ปทั้งในกรณีที่.
โปรดดำเนินการจะต้องดำเนินการในรัฐที่ทำให้เกิดการคันโยก※.
วัสดุ
ส่วนตัด: สแตนเลสมีด
Lever: โพลีคาร์บอเนต
แขนจับ: ABS เรซิน
เลนส์: คริลิคเรซิน
ตะไบ: สแตนเลประมวลผลพิเศษ (แกะสลัก)
ข้อควรระวัง
– ตัดขอบได้เสร็จสิ้นอย่างแม่นยำ กรุณาอย่าตัดอะไรอื่นนอกจากเล็บ.
– ใบมีดทำจากสแตนเลส, แต่มันจะเป็นเมื่อคุณออกเช่นความชื้นหรือก่อให้เกิดสิ่งสกปรกสนิมหลังการใช้งานอย่างทั่วถึงขจัดสิ่งสกปรกและการเก็บรักษาความสะอาดที่ดีมีความชื้นต่ำระบายอากาศได้โปรดให้ฉัน
.
-. โปรดให้ออกจากการเข้าถึงของเด็ก
※เราใช้การแปลอัตโนมัติหากคุณมีข้อสงสัยในตัวสินค้า กรุณาติดต่อเรา
Product Introduction
· Fukazume and not safety design.
– with a guard to prevent a cut too much of the nail.
– nails of reducing the scattering! With catcher case.
– with fine Tsumeyasuri on the back of the lever.
– straight line and a vertical blade with the ideal to the pawl.
Product Use
◆ If you take out the catcher case
(1) to move the lens to a position that does not get in the way.
(2) to state that caused the lever.
(3) Turn the body.
Has one hand in the lever firmly, please remove the butt side of the blade (metal part) from the case and press lightly in a downward direction with the opposite hand.
(4) so as to avoid the projection on the part of the blade, it can be removed smoothly and pull the body diagonally.
◆ If you want a catcher
(1) in the state that caused the lever, after inserting the left and right of the projection attached to the catcher case the gap between the blade and snap the entire blade in the case.
Please operation must be performed in the state that caused the lever ※.
Materials
Cutting part: stainless steel cutlery
Lever: Polycarbonate
Catcher arms: ABS resin
Lens: acrylic resin
Rasp: Stainless special processing (etching)
Precautions
– the cutting edge has finished precisely. Please do not cut anything other than nails.
– blade is made of stainless steel, but it will be when you leave, such as moisture or dirt cause of rust, after use Thoroughly remove dirt, and clean storage at good low humidity breathable Please give me.
– Please keep out of the reach of children.
※We are using automatic translation for items. Please contact us if you cannot understand something.