richell Fluffy baby bath plus
richell Fluffy baby bath plus
Brand: richell
Weight: 1225g
JAN: 4973655216033
※Quantity limit per purchase:2 pieces
Dispatch Est.: 3days
ข้อมูลผลิตภัณฑ์
– เข้าสู่ความสุขทางอากาศเพื่อให้เป็นแม่ใหม่!
– มันเป็นที่อาบน้ำอ่างอาบน้ำสำหรับเด็ก
– ตั้งแต่ปั๊มลมมีในตัวคุณสามารถขยายโดยไม่ต้องใช้การแทรกอากาศของผลิตภัณฑ์ที่สามารถใช้ได้ในเชิงพาณิชย์
โครงสร้าง W ของแขนที่เหมาะสำหรับอากาศชั้นแนวนอนของแม่และชั้นอากาศแนวตั้งที่แข็งแกร่ง มันรวมความสะดวกในการใช้งานและความแข็งแรง
– พอดีกับด้านหลังของเด็ก และให้ทัศนคติในด้านหลังของความลาดชัน
·มั่นจับเด็ก เพราะมีจุกเพื่อป้องกันการลื่นไถลออกของเด็ก
Fold- การจัดเก็บและพกพา
วิธีใช้
※เมื่อใช้ปั๊มลม, โปรดปิดทางเข้าของอากาศ
(1) ที่สูงเกินจริงที่คุณใส่อากาศในผลิตภัณฑ์นี้
(2) อุณหภูมิของน้ำร้อนจะถูกปรับให้อุณหภูมิเหมาะสม (37-40 องศา) และใส่ได้ถึง MAX บรรทัด
(3) หลังจากใช้ตัดการเชื่อมต่อน้ำจากท่อระบายน้ำพอร์ตโปรดแห้งในสถานที่ที่มีอากาศถ่ายเทล้าง
(4) กดช่องอากาศด้วยนิ้วและถอดอากาศในขณะที่ถือลงเบา ๆ ผลิตภัณฑ์นี้
ข้อมูลจำเพาะ
◆ขนาด
มิติภายนอก: ความกว้าง (ประมาณ) 69 ความลึก * (ประมาณ) 47 ความสูง * (โดยประมาณ) 28cm
มิติภายในความลึก: ประมาณ 28cm
◆ความจุ
เต็มไปด้วยน้ำที่ความจุเวลา: ประมาณ 21L
ความจุที่อนุญาตในสภาพการใช้งาน: ประมาณ 8L (ตำแหน่งสาย MAX)
◆เวลาที่จำเป็นสำหรับเมื่อคุณใส่อากาศ
ประมาณ 1 นาที
※ขนาดและกำลังการผลิตก็จะแตกต่างกันเล็กน้อยขึ้นอยู่กับปริมาณของอากาศ
วัสดุ
ร่างกาย: ไวนิลคลอไรด์เรซิน (พลาสติอาหารสุขาภิบาลกฎหมายที่สอดคล้องกันใช้)
ฝาครอบด้านบนที่ปั๊มลม A / จุกปั๊มลม B, ไก่หยุดช่องอากาศ: เรซินไวนิลคลอไรด์
วาล์วแอร์: ยางสังเคราะห์
วาล์วอากาศภายใน: ยูรีเทน
ข้อควรระวัง
– ตั้งแต่เด็กมีพฤติกรรมที่ไม่คาดคิดเข้าร่วมประชุมอยู่เสมอพ่อแม่หรือผู้ปกครองโปรดเก็บตาบนเด็กอย่างแน่นอน
•เมื่อคุณปล่อยตาในสถานะที่ใส่น้ำร้อนเพราะมีความเสี่ยงจากการจมน้ำโปรดหยุดอย่างแน่นอน
•ให้แน่ใจว่าจะสนับสนุนหัวของเด็กในระหว่างการอาบน้ำหรือจมน้ำตายโปรดไม่ให้น้ำเข้าหู
·เด็กยังคงวางอยู่บนผลิตภัณฑ์นี้โปรดอย่าย้าย
•เมื่อวางอากาศโปรดที่สูงขึ้นดังกล่าวเท่าที่ริ้วรอยออกไปข้างนอกยังคงเป็น มีความเป็นไปได้ว่าอากาศจะใส่มากเกินไปอากาศในน้ำร้อนความร้อนขยายที่เสียหายคือ
•ก่อนที่จะใช้งานโปรดตรวจสอบให้แน่ใจว่าไม่มีการรั่วไหลของอากาศของผลิตภัณฑ์นี้
·ใช้หลีกเลี่ยงการโปรดในการใช้งานอื่น ๆ มากกว่า
* ผลิตภัณฑ์นี้โปรดอย่าใช้มันในน้ำ
– กรุณาใช้แบนตำแหน่งที่มั่นคง
เปียกเช่นห้องน้ำหรือจมโดยใช้สถานที่ที่ดียัง ถ้าคุณต้องใช้ในสถานที่อื่น ๆ โปรดตรวจสอบการใช้ที่ต่ำกว่าของผลิตภัณฑ์นี้วางแผ่นกันน้ำหรือเสื่อ
•เมื่อจะใช้ในอ่างเมื่อเด็กเช่นก๊อกน้ำโปรดระมัดระวังเนื่องจากมีความเสี่ยงของการเกิดอุบัติเหตุ
•น้ำประปาเมื่อร้อนกรุณากดแน่นบนวาล์วน้ำ shutoff
– 50 องศาหรือมากกว่าของน้ำร้อนโปรดอย่าใส่ มีความเป็นไปได้ว่าผลิตภัณฑ์นี้อาจได้รับความเสียหายคือ
– น้ำร้อนอุณหภูมิที่เหมาะสมคือ 37-40 องศา กรุณาตรวจสอบให้แน่ใจก่อนที่จะวางเด็ก
※เราใช้การแปลอัตโนมัติหากคุณมีข้อสงสัยในตัวสินค้า กรุณาติดต่อเรา
Product Introduction
– into the air happy to be a new mother!
– It is bathing for the bathtub of children.
– Since the air pump has a built-in, you can inflate without the use of air insertion of commercially available products.
W structure of-arm-friendly horizontal air layer of mom and, strong vertical air layer. It combines the ease of use and strength.
– fit on the back of the child. And keep the attitude in the back of the slope.
· Firmly catch the child. Because with stopper, to prevent slipping off of the child.
Fold-, storage and portability
Product Use
※ When using an air pump, please close the air inlet.
(1) inflated you put the air in this product.
(2) the temperature of the hot water is adjusted to an appropriate temperature (37 to 40 degrees), and put up to MAX line.
(3) After use, disconnect the water from the drain port, please dry in a well-ventilated place Wash.
(4) Press the air inlet with a finger, and disconnect the air while holding down gently this product.
Specifications
◆ size
External dimensions: width (about) 69 * Depth (about) 47 * height (approximately) 28cm
Depth inside dimension: about 28cm
◆ capacity
Filled with water at the time capacity: about 21L
Allowable capacity in the use state: about 8L (MAX line position)
◆ time required for when you put the air
About 1 minute
※ The size and capacity, it will vary slightly depending on the amount of air.
Materials
Body: Vinyl chloride resin (Food Sanitation Law corresponding plasticizer used)
Top cover, the air pump A / stopper air pump B, stop cock, air inlet: vinyl chloride resin
Air valve: Synthetic rubber
Internal air valve: Polyurethane
Precautions
– Since child behaves unexpected, attendance is always a parent or guardian, please keep an eye on children absolutely.
• When you release the eye in a state that put the hot water, because there is a risk of drowning, please stop absolutely.
• Be sure to support the head of the child during bathing, or drowned, please not allow water to enter the ear.
· Children remain placed on this product to, please do not move.
• When placing the air, please inflated to such an extent that a wrinkle to the outside remain. There is a possibility that the air is too put the air in the hot water of heat expands damaged.
• Before use, please be sure sure there is no air leakage of this product.
· Please avoid use in applications other than.
* This product, please do not use it in the water.
– Please use a flat, stable location.
Wet, such as, a bathroom or sink Please use a good location also. If you must use in other locations, please be sure to use the lower of this product laid a waterproof sheet or mat.
• When to use in the sink, when children such as faucet, please be careful because there is a risk of accident.
• When hot water supply, please Press firmly on the water shutoff valve.
– 50 degrees or more of hot water, please do not put. There is a possibility that this product may be damaged.
– hot water is the optimum temperature is 37 to 40 degrees. Please be sure to check before placing the child.
※We are using automatic translation for items. Please contact us if you cannot understand something.